Core Outdoor Features

• Dual Advantages of Double-sided Co-extrusion + Six-round-hole: 360° protection by double-sided co-extruded layer, with excellent UV, scratch and stain resistance; fading rate ≤5% after 5-year outdoor exposure, usable on both sides. Six-round-hole optimized by mechanical simulation: bending strength ≥18MPa, impact strength ≥5.2kJ/m² at 2.86kg/m, load-bearing comparable to thick boards. Efficient drainage avoids rainwater aging, enhancing humid environment adaptability.

• Excellent Extreme Weather Resistance: Third-party tested to withstand -40℃~75℃, resisting tropical UV, cold freeze-thaw, coastal salt spray and mild pollution. 20-25 years outdoor service life, far exceeding solid wood and ordinary single-sided co-extruded wood-plastic.

• Stable, Durable & Easy Maintenance: 2.86kg/m balances stability and portability; one worker can carry over 50m at a time for high construction efficiency. Double-sided co-extruded layer resists moth, mildew and rot. No painting/waxing needed—clean with water, reducing maintenance cost greatly.

• High Cost-effectiveness for Foreign Trade: 138mm width improves laying efficiency (only 7.25m per ㎡). Mature co-extrusion ensures ≤0.3mm dimension accuracy and <0.5% installation loss. Six-round-hole saves raw materials; lightweight reduces purchase and cross-border transportation costs.

Global Outdoor Application Scenarios

Widely adapting to mid-to-high-end outdoor scenarios around the world, the core application areas include: 

1. Public landscape projects: urban central park trails, 5A scenic spot boardwalks, wetland park water-facing platforms, municipal square leisure areas; 

2. Commercial outdoor spaces: high-end shopping mall outdoor seating areas, five-star hotel courtyards, chain restaurant terraces, RV camp high-quality floors; 

3. High-end residential outdoors: villa courtyards, top-floor terraces, high-end homestay outdoor platforms, private garden trails; 

4. Special outdoor scenarios: dock anti-slip trails, yacht club deck auxiliary materials, swimming pool surrounding anti-slip floors, golf course supporting trails, etc.

Standard Installation Method

Adapting to the general installation process of outdoor floors worldwide, the operation is convenient and efficient without professional special equipment: 

1. Foundation pretreatment: The outdoor ground needs to be leveled and compacted, with a 2%-3% drainage slope reserved. For soft soil foundations, a 10-15cm gravel cushion and C15 concrete leveling are required; 

2. Keel laying: Use outdoor-specific anti-corrosion wood keels (moisture content ≤15%) or hot-dip galvanized steel keels, fixed at a spacing of 40-45cm. The keel level error is ≤2mm/m, and the top surface must be consistent with the drainage slope; 

3. Board installation: Choose either side to face up according to scenario needs, connect with keels through six-round holes using special stainless steel buckles or self-tapping screws, and reserve 3-5mm expansion joints between boards to cope with temperature changes; 

4. Final acceptance: After installation, clean the surface debris, check the firmness of the boards, uniformity of gaps and flatness, and put them into use if there is no looseness, warping or height difference.